The stator winding machine can record and transmit the number of spindle

The stator winding machine can record and transmit the number of spindle turns and the running speed of the equipment, so that the control system can obtain the parameters of the spindle running in time. Generally, the Hall element is used as the sensor, and the strong magnetic or metal halved disc is used as the detected object. . Application of the cable system: The cable system is a key component of the performance of the winding device. Of course, the application of the sensor is indispensable. The function of the origin sensor is to transmit the operating state of the wire screw to the control system.

As for the stator winding machine, when the equipment is parked, the buffer can be parked more accurately; the number of turns is the number of turns that the equipment needs to run according to the production process, and it is divided into the total number of turns and the number of turns corresponding to each step. The setting should be that the total number of turns is equal to the sum of the number of turns in each step; the running speed is used to control the running speed of the equipment. The setting of the speed needs to be determined in combination with the actual working conditions of the production process and winding, too fast and too slow. Not conducive to the formation of the coil

The winding machine is a special equipment for winding various types of electromagnetic coils. According to the winding method, it can be divided into three categories: parallel winding machine, flying fork winding machine and ring winding machine. The parallel winding machine is a winding machine that rotates the skeleton by the main shaft and cooperates with the three-dimensional mechanism to move and position and control the enameled wire, so that the enameled wire is arranged in a spiral line on the outer layer of the skeleton, and is usually used for transformers, inductors and the like. When the flying fork winding machine is wound, the skeleton is fixed, and the side spindle drives the flying fork to rotate the enameled wire on the outer groove of the skeleton, which is usually used for the motor rotor and the cross meter coil. The circular winding machine is a reciprocating linear motion of the enameled wire drawn by the guide pin, and is rotated with the skeleton to wind the enameled wire on the inner ring groove of the skeleton, which is usually used for the motor stator and special products.